Description
The Golf Course is a single-axle broadcast spreader designed with the Golf Course and Turf industry in mind. The standard model is a simple to use PTO Drive Spinner setup and Press Wheel Drive with Hydraulic Cylinder Engagement on the conveyor or can be equipped with Hydraulic Rate Control System for even better accuracy and as applied mapping.
120” Long x 60” Wide Hopper
90 Cubic Ft. Capacity
Quick Change Sprockets for High/Low Rates (75 to 4000 lb/acre)
PTO Drive, or Tractor-Supplied Hydraulics
Heavy-Duty 12,000# Rigid Axle and Hubs
304L Stainless Steel Mesh Type Chain
Features
304 Stainless Steel Hopper
45 Degree Sloped Sides
16” Stainless Mesh Type Chain
2” Rear Roller Shaft
Press Wheel Driven Conveyor
PTO Driven Spinners
Single Rigid Axle with 19L x 16.1 Tires
High/Low Conveyor Drive Sprockets
Hydraulic Cylinder Engagement on Press Wheel
Stainless Steel Rack and Pinion metering gate
Safety Chains
Options
Spinner Options
Hydraulic Motor-powered Spinners (requires 16 GPM from Tractor)
304 Stainless Steel Spinners Dishes and Blades
Stainless Steel Spinner Assembly
Raven Spinner Speed Control (Requires Capable Control System)
Constant Velocity PTO Shaft
Conveyor Options
Steel Cleated Ground Wheel
Plug to Tractor Ground Wheel Engagement
Extra-low Rate Sprocket Kit (third pair)
Stainless Roller Chain
Plug to Tractor Hydraulic Drive
Self-contained PTO to Pump Hydraulic Drive
16, 20 and 24” Mesh Chain Options
Split Chain – Dual 8” Chains
Tarp Options
Fitted Tarp
Agri-Cover SRT-2 Roll Tarp System
Optional Electronics
Rate Control
Variable Rate Capability
ISO Ready
Specs
Hopper Construction
304 Stainless Steel
Hopper Width
60” (5’)
Hopper Length
120” (10’)
Total Length of Spreader
202 ¾” (16’ 10 ¾”)
Capacity
90 Cu. Ft (struck level)
Hopper Loading Height
71 ½” (5' 11 ½”)
Tire/Wheel
19L X 16.1 Tires
Ground Clearance
22" @ Axle & Spread Shield
Hubs & Spindles
8 Bolt 10,000 # Hubs
Axle
Single Rigid Axle
Wheel Track
62"
Hitch
Pin –Clevis Type (Adjustable)
Jack
7,000# Jack
Spinners
Dual 24" Dish Type Spinners with 6 Blades Each
Spinner Drive
PTO Drive Spinners with Constant Velocity PTO Shaft
(Optional Hydraulic Drive)
Conveyor Chain Type
16” 304L Stainless Steel Mesh Type Chain
(Optional Split Chain w/ Dual 8” Mesh Type Chains)
Conveyor Chain Drive
Press Wheel Drive with Quick Change Sprockets
(Optional Hydraulic Drive when using Rate Control System)
Metering Gate
304 Stainless Steel Gate with Stainless Steel Rack and Pinion
Copyright © 2025 Chandler Equipment. ALL RIGHTS RESERVED
