Description

The Orchard and Grove Spreader is a low profile single-axle broadcast spreader designed specifically with the orchard and grove industry in mind. The standard model is a simple to use PTO Drive Spinner setup and Press Wheel Drive with Hydraulic Cylinder Engagement on the conveyor or can be equipped with Hydraulic Rate Control System for even better accuracy and as applied mapping.

Our optional banding attachment (which is constructed from 304 – stainless steel) is normally used with this spreader to divert material directly to the trees.

  • 120” Long x 60” Wide Hopper
  • 90 Cubic Ft. Capacity
  • Quick Change Sprockets for High/Low Rates (75 to 4000 lb/acre)
  • PTO Drive, or Tractor-Supplied Hydraulics
  • Heavy-Duty 12,000# Rigid Axle and Hubs
  • 304L Stainless Steel Mesh Type Chain
Inquiry
Price: N/A

Features

  • 304 Stainless Steel Hopper
  • 45 Degree Sloped Sides
  • 16” Stainless Mesh Type Chain
  • 2” Rear Roller Shaft
  • Press Wheel Driven Conveyor
  • PTO Driven Spinners with Constant Velocity PTO Shaft
  • Single Rigid Axle with 19L x 16.1 Tires
  • High/Low Conveyor Drive Sprockets
  • Hydraulic Cylinder Engagement on Press Wheel
  • Stainless Steel Rack and Pinion metering gate
  • Safety Chains

Options

  • Spinner Options
    • Hydraulic Motor-powered Spinners (requires 16 GPM from Tractor)
    • 304 Stainless Steel Spinners Dishes and Blades
    • Stainless Steel Spinner Assembly
    • Banding Attachment to Divert Material to the trees. (304 SS)
    • Raven Spinner Speed Control (Requires Capable Control System)
  • Conveyor Options
    • Steel Cleated Ground Wheel
    • Plug to Tractor Ground Wheel Engagement
    • Extra-low Rate Sprocket Kit (third pair)
    • Stainless Roller Chain
    • Plug to Tractor Hydraulic Drive
    • Self-contained PTO to Pump Hydraulic Drive
    • 16, 20 and 24” Mesh Chain Options
    • Split Chain – Dual 8” Chains
  • Tarp Options
    • Fitted Tarp
    • Agri-Cover SRT-2 Roll Tarp System
  • Optional Electronics
    • Rate Control
    • Variable Rate Capability
    • ISO Ready

Specs

Hopper Construction 304 Stainless Steel
Hopper Width 60” (5’)
Hopper Length 120” (10’)
Total Length of Spreader 202 ¾” (16’ 10 ¾”)
Capacity 90 Cu. Ft (struck level)
Hopper Loading Height 63 ¾” (5' 3 ¾”)
Tire/Wheel 19L X 16.1 Tires
Ground Clearance 14 ¼” @ Axle & Spread Shield
Hubs & Spindles 8 Bolt 10,000 # Hubs
Axle Single Rigid Axle
Wheel Track 62"
Hitch Pin –Clevis Type (Adjustable)
Jack 7,000# Jack
Spinners Dual 24" Dish Type Spinners with 6 Blades Each
Spinner Drive PTO Drive Spinners with Constant Velocity PTO Shaft (Optional Hydraulic Drive)
Conveyor Chain Type 16” 304L Stainless Steel Mesh Type Chain (Optional Split Chain w/ Dual 8” Mesh Type Chains)
Conveyor Chain Drive Press Wheel Drive with Quick Change Sprockets (Optional Hydraulic Drive when using Rate Control System)
Metering Gate 304 Stainless Steel Gate with Stainless Steel Rack and Pinion

Brochure