Description
The Chandler C/L Pull-Type Litter and Shavings Spreader, in production for more than 45 years, is the model of dependability in the field. Whether you’re dressing cotton fields with litter or laying shavings in a poultry house, the C/L Pull-Type can be configured/customized to perform numerous duties all over the farm.
10-26’ Units
Scalable Frame and Suspension Options
Mechanical or Hydraulic Drive
Guidance and Rate Control Ready
Universal Pump standard on Self-Contained Hydraulic Units
Features
Standard running gear:
10-16’: 12.5L x 15 tire and wheels with (2) 7000# torsion axles
18-26’: 16.5L x 16.1 tire and wheels with (2) 10000# torsion axles
3/16” Plate used on Floor and Rails; 10 gauge used for hopper front and sides
88” wide hopper and 34” floor width
24” Flat Disc (1/4 plate) with 9 x ¼” thick spinner blades
D-667X chain with 3/8 thick flat bars welded every fifth link
Mechanical:
50:1 conveyor worm drive (2” CR rear conveyor shaft)
PTO-driven gearboxes for spinners
Hydraulic:
Plug to tractor or self-contained hydraulic
Parker M3000 Spinner Motors
Single motor conveyor drive
BOSS JIC hydraulic fittings
Case drain ready
Adjustable flow control valves for speed control on both conveyor and spinners
Options
Hopper
304 Stainless Hopper Construction
304 Stainless Rails and Floor
UHMW Poly-lined 409 Stainless Floor Construction
40” Wide Floor; Strictly for shavings use unless triple row chain option is included
Inverted “V”; extends conveyor chain life by redirecting weight of dense material to hopper sides
¼” plate floor and rails
7 gauge sides and ends
Bolt-on frame
Bolt on spinner assembly
Extension brackets and 2 x 8” boards
52 Degree sloped sides
Spinners
30” Spinners with 11” Blades
Heat treated and 304 Stainless
Hydraulic
Series/Parallel Valve for “Hi-Low” function on self-contained systems
Electric switchbox for in tractor conveyor control
Rate Control ready with on-spreader Raven controls
Heavy-Duty Charlynn spinner motors
Plug to tractor hydraulic gate with metering arm
Conveyor Chain
D-667XC with ½” thick bars spaced every 5th link
D-88K with ½” thick bars spaced every 4th link
Triple row pintle chain with bars welded between each row
Bars spaced every link or every other link
Suspension
Walking-Beam Suspension
700/40 Flotation Tires available on Walking-Beam
14L X 16.1 in lieu of 12.5 X 15 on 7000# Axles
19L X 16.1 in lieu of 16.5 X 16.1 on 10000# Axles
Specs
Hopper Width
7’ 3”
Hopper Length
12’ to 26’
Hopper Height
82 ¾” with 12.5L X 15
Hopper Height
85 ½” with 14L X 16.1
Hopper Height
86 ¾” with 16.5L X 16.1
Hopper Height
87 ¾” with 19L x 16.1
Hopper Height
89 ¾” 21.5L X 16.1
Hopper Height
95 ½” with 700/50 – 22.5
Capacity (45 Degree Sides)
12’ - 236 Cu.Ft to 26’ - 512 Cu.Ft
Capacity (52 Degree Sides)
12’ - 213 Cu.Ft to 26’- 463 Cu.Ft
Chain Type
34” Wide Bar Type Chain
Overall Length
12’ (168”) to 26’ (336”)
Copyright © 2025 Chandler Equipment. ALL RIGHTS RESERVED
